Installation Of The 'External Receiver 1 - Philips DVDR80 Operating Instructions Manual

Setup
Press Aor Bto select. Then press OK to confirm.
Setup
Choose item to set up :
Language
Country
Postal code
External receiver 1
External receiver 2
External receiver 3
40

Installation of the 'External receiver 1'

Home
If you have connected an external receiver (satellite receiver, set-top box, cable TV box), you
English
must also install it in the GUIDE Plus+
United Kingdom
XXXXX
watch via the receiver can also be displayed in the GUIDE Plus+
None
recording.
None
You can connect up to three external receivers to the DVD-Recorder.
None
1
Select with P- B or P+ A in the 'Setup'screen the line 'External
receiver 1' and confirm with OK .
2
Read the information on the screen and confirm with OK .
3
Select the type of the external receiver. This setting serves to
preselect the type used.
Which types can I choose?
This selection depends on the country and the GUIDE Plus+
provider. Therefore, some types may have no function.
'Cable': Cable receiver, cable box.
'Satellite': Analogue or digital satellite receiver.
'Terrestrial': Digital terrestrial decoder box.
'None': No external device connected.
4
Confirm with OK .
If you selected 'None', there is nothing further you need to do here.
Read on in the section entitled 'Continue set-up'.
Otherwise, you should continue here.
5
Select your provider from the list. If you do not have a provider,
select 'No provider'
6
Confirm with OK .
7
Select the brand of your external receiver from the list. If, additionally
your provider is printed on your receiver (e.g. Sky,...), you must
choose the provider as brand. Depending on the type and provider
you selected, a limited selection will appear.
Browse through the pages of the list using O , N .
a My brand is not included in the list
b Select 'Satellite' and as provider 'No provider'.
b If you do not find your brand, please proceed as follows:
1
2
3
8
Press OK .
® system. TV programmes (TV channels) that you can only
You will see a list of all stored brands.
Select 'None'. You will find this setting at the end of the list.
Please note the type and manufacturer of your external receiver and call
the customer support service in your country. You will find the
telephone number on the back of this instruction manual.
The control data of the external receivers are automatically updated
(completed) via the GUIDE Plus+
aerial, the cable, or the external receiver. You do not need to bring the
device to a service centre.
® system and be programmed for
®
system
®
system. This is done through the
The GUIDE Plus+® System
Tip
Problem