Setting The Time And Date - Philips DVDR80 Operating Instructions Manual

Installation
Time/Date
Time
Year
Month
Date
Clock preset
To exit press
SYSTEM MENU
36

Setting the time and date

If the display shows an incorrect time or '--:--', the time and date must be reset manually.
If a TV channel which transmits TXT/PDC (teletext/PDC) is stored under programme number
'P01', the time and date will automatically be taken from the TXT/PDC information.
Warning!
If data from the GUIDE Plus+
GUIDE Plus+ ®
1
Press
appears.
2
Select '
3
Select 'Installation' using P- B or P+ A and confirm with C .
4
Select 'Time/Date' using P- B or P+ A and confirm with C .
5
Check if the time in 'Time' is correct. If required, change the time
with the number buttons 0..9 on your remote control.
20:00
6
Check 'Year', 'Month' and 'Date' in the same way. To move between
2003
the fields, use P- B or P+ A .
01
01
01
7
Check the displayed settings and confirm with OK .
'Stored' will appear briefly on the screen.
8
To end, press SYSTEM-MENU .
® system is already available, the date/time will be controlled by the
system. 'Off' will then appear in line 'Clock preset'.
SYSTEM-MENU on the remote control. The menu bar
' symbol with D or C .
A
Installing your DVD recorder