Remote Control Settings; Disk Feature Menu - Philips DVDR80 Operating Instructions Manual

Access control Enter code...
Auto resume On
User preferences

Remote Control settings

In this menu you can set the remote control type to which your DVD recorder should respond.
'DVD player': The DVD recorder responds to the supplied remote control and the remote
'DVD recorder': The DVD recorder only responds to the supplied remote control.

Disk feature menu

In this menu you can make the changes that relate to the disc:
'Access control'
Please read the next chapter on 'Access control (child lock)'.
Disc features
'Auto resume'
If playback of a pre-recorded DVD video disc or video CD is interrupted (button STOP h or
OPEN/CLOSE J ) when the disc is reloaded (disc is started) playback starts at the precise
location where it stopped. This applies not only to the current disc but to the last 20 discs
played.
This feature can be switched off if not required.
'PBC'
This line appears only if a VCD is loaded.
This function lets you activate or deactivate the PBC menu (Playback Control) for video CDs.
See 'Playing a (Super) Video CD'.
'Finalise disc'
This feature allows you to finalise DVD+R discs. If the disc has already been finalised this line will
appear darker.
'Adapt disc format'
If a DVD+RW has been recorded in a computer drive or in another DVD recorder the index
screen may not be displayed correctly.
This feature allows you to change the format of the disc.
It is therefore only visible if the disc format is different.
control of a DVD player (remote control code RC-6).
Choose this setting if your Philips TV remote supports DVD functions.
99