Connecting Components - Integra DTR-7.6/6.6 Instruction Manual

DTR-7.6,6.6.book Page 33 Monday, September 26, 2005 1:40 PM
Connecting Your Components —Continued
Connecting Components
Step 1: Make sure that each Integra component is connected to the AV receiver with an analog audio cable (RCA).
Step 2: Make the
connection.
With (Remote Interactive), you can use the following special functions:
Auto Power On/Standby
When you start playback on a component connected via
on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all components
connected via will also go on Standby. This function will not work with components connected to an AC OUTLET
on the AV receiver.
Direct Change
When playback is started on a component connected via
the input source. If your DVD player is connected to the AV receiver's multichannel DVD input, you'll need to press
the [Multi CH] button to hear all channels (page 53), as the Direct Change
Remote Control
You can use the AV receiver's remote controller to control your other
remote controller at the AV receiver's remote control sensor instead of the component. You must enter the appropriate
remote control code first (see page 85).
Notes:
• Use only cables for
cables are supplied with Integra players (DVD,
CD, etc.).
• Some components have two
connect either one to the AV receiver. The other
jack is for connecting additional
components.
• Connect only Integra components to
Connecting other manufacturer's components
may cause a malfunction.
• Some components may not support all
tions. Refer to the manuals supplied with your
other Integra components.
• If you connect an Integra MD recorder, CD
recorder, or next generation HDD-compatible
component, you must change the input display
(see page 44).
, if the AV receiver is on Standby, it will automatically turn
, the AV receiver automatically selects that component as
connections.
jacks. You can
REMOTE
CONTROL
-capable
jacks.
func-
function only selects the FRONT jacks.
-capable Integra components, pointing the
e.g., CD player
R
ANALOG
AUDIO OUT
e.g., DVD player
R
ANALOG
AUDIO OUT
IN
L
R
CD
FRONT
L
R
DVD
L
L
33