Integra DTR-7.6/6.6 Instruction Manual page 16

DTR-7.6,6.6.book Page 16 Monday, September 26, 2005 1:40 PM
Remote Controller —Continued
HDD Mode
HDD mode is for controlling Integra's next generation
HDD-compatible components. As of 2005, it can be used
with the Onkyo DS-A1 Remote Interactive Dock and
Apple iPod connected via
When Using the Onkyo DS-A1:
• Connect the DS-A1 to the TAPE IN or VIDEO 3 IN
jacks.
• Set the DS-A1's RI MODE switch to HDD.
• Set the AV receiver's input display to HDD (see
page 44).
• Refer to the DS-A1's instruction manual.
A
B
C
D
5
F
G
8
9
J
16
.
HDD
K
L
M
N
O
P
A
Standby button
Turns off the HDD-compatible component.
B
On button*
Turns on the HDD-compatible component.
C
Arrow [ ]/[ ] and Enter buttons*
Used to navigate menus and select items.
D
Album +/– button*
Selects the next or previous album.
E
Display button*
Turns on the backlight for 30 seconds.
F
Previous [ ] button
Restarts the current song. Press it twice to select the
previous song.
G
Pause [ ] button
Pauses playback. (With 3rd generation iPods, it
works as a Play/Pause button.)
H
Rewind [ ] button
Press and hold to rewind.
I
Playlist [ ]/[ ] buttons*
Used to select the previous or next playlist on the
HDD-compatible component.
J
Repeat button*
Used with the repeat function.
K
Menu button*
Used to access menus.
L
Play [ ] button
Starts playback. If the component is off, it will turn
on automatically. (With 3rd generation iPods, this
button works as a Play/Pause button.)
M
Next [ ] button
Selects the next song.
N
Stop [ ] button
Stops playback and displays a menu.
O
Fast Forward [ ] button
Press and hold to fast forward.
P
Random button*
Used with the shuffle function.
* Buttons marked with an asterisk (*) are not supported by
3rd generation iPods.