Listening To Radio Broadcasts; Tuning Into A Radio Station; Listening To A Stereo Radio Station (Fm Mode) - Integra DTR-7.2 Instruction Manual

Integra av receiver instruction manual
Hide thumbs Also See for DTR-7.2:
Table of Contents

Advertisement

Listening to Radio Broadcasts

One of the features of the DTR-7.2 that is most frequently used is its
ability to play FM and AM broadcast radio stations. The DTR-7.2
provides a number of listening modes perfect for listening to the
radio and getting the most out of your audio system. Also, by
presetting radio stations that you listen to frequently, you can select
them easily by pressing the CH

Tuning into a radio station

1. Press either the AM or FM input
source button.
2. Using the Tuning
and
on the front panel, tune into the
station you desire.
"FM STEREO"
(Lights red)
Band
Frequency
• The tuner frequency changes in 50 kHz increments for FM
and 10 kHz increments for AM.
• When tuning into FM stations, you can press the Tuning
button continuously for more than 0.5 seconds to scan for
an FM station in the direction of the button you pressed (FM
auto tuning mode). After you release the button and a station
is received in stereo, the scanning stops.
48
Display
Dimmer
Standby/On
Standby
Power
On
O f f
Direct
Stereo
Surround
U
psampling
Phones
Zone
2
(
GRN
)
Rec (
)
RED
DVD
Video 1
Video 2
Video 3
Audio
Selector
VCR 1
VCR 2
button on the remote controller.
FM
AM
Tuning
buttons
Tuned
Auto mode
in stereo
TUNED
FM STEREO
AUTO
FM Mode
Tuning /
Rec Out
Zone 2
Of f
Master Volume
Se tup
Tun ing
Enter
Return
Preset
THX
DSP
FM Mode
Memory
A-FO RM Listening Mode Memory
Clear
Video 5 / Video Cam Input
Video 4
Video 5
Tape
FM
AM
Phono
CD
Digital
S Video
Video
L
Audio
FM AM

Listening to a stereo radio station (FM mode)

When you tune into a radio station,
indicator appears in the display. If you tune into
an FM station in stereo, then "FM STEREO"
appears. If the signal is weak, it may be
impossible to tune into the station in stereo. In
such a case, press the FM Mode button on the
front panel. The AUTO indication disappears
and the radio station is output in the monaural
mode. To return to stereo, press the FM Mode
button again. "AUTO" appears. Some inter-
station noise may be heard, but the sound will
not cut in and out as it would if stereo was
selected.
or
R
TUNED
FM Mode
Memory

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents