Making Hdmi Connections - Integra DTR-5.9 Instruction Manual

Integra av receiver instruction manual
Hide thumbs Also See for DTR-5.9:
Table of Contents

Advertisement

Connecting Your Components—Continued

Making HDMI Connections

If you have an HDMI-compatible player, you can connect it to the AV receiver with an HDMI cable.
Step 1: Use HDMI cables to connect the AV receiver's HDMI jacks to your HDMI-compatible DVD player, TV,
projector, and so on.
Step 2: Assign each HDMI IN to an input selector in the HDMI Input Setup (see page 44).
■ Video Signals
Digital video signals received by the HDMI IN jacks are normally output by the HDMI OUT for display on your TV.
Composite video, S-Video, and component video sources can be upconverted for the HDMI output. See "Video Con-
nection Formats" on page 23 for more information.
■ Audio Signals
Digital audio signals received by the HDMI IN jacks are output by the speakers and headphones connected to the AV
receiver. Normally, they are not output by the HDMI OUT, unless the Audio TV Out setting is set to On (see page 91).
To listen to audio received by the HDMI IN jacks through your TV's speakers, set the Audio TV Out
Hint!
setting to On (see page 91), and set your DVD player's HDMI audio output setting to PCM.
Notes:
• The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can
be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you'll need
to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In
addition, video signals from a PC are not supported.
• When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be
seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV
power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound
may be cut off.
• The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the
picture is poor or there's no sound from a component connected via HDMI, check its setup. Refer to the connected
component's instruction manual for details.
32
HDMI
DVD player
IN 1
HDMI
IN
OUT
OUT
(DVD)
SIRIUS
ANTENNA
TV
AM
FM
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents