Programming Recordings Without The G-Code System - Philips G-Code HDRW 720/69 Operating Instructions Manual

Programming a recording (TIMER)
a
'Please enter programme number' appears on the
screen
b
This message appears when the TV channel has not been assigned
yet.
Enter the program number and confirm with OK .
a
The following message appears on the screen: 'G-Code
number wrong'
b
The entered G-Code number is incorrect. Repeat the entry or end
with TIMER s .
b
Check time/date (see chapter 'Installing your DVD recorder', section
'Setting the time & date').
P
The decoded data appears after confirmation.
You can use the colour buttons to make the following settings.
First, the right tile must be highlighted ( C button). Check the
functions (descriptions) in the corresponding colour field
before pressing a button.
Deactivate 'VPS/PDC'!
If 'VPS/PDC' appears instead of the time, press the yellow function
button until the 'V/P' sign disappears.
Setting up repeat recordings
You can choose from the following settings with the green action button:
'Frequency': 'Once': single recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the
same day e.g. Monday).
6 If all information is correct, press the OK button. The data is
stored.
7 To end, press TIMER s .
If one or more recordings have been programmed 'TIMER' will light up
on the display.
34
Manual Home
G-Code
Please enter the G-Code programming number and
press OK to confirm.
1 2 3 4 5 = = = =
Grid Search Schedule Info
/Record Freq. Timing
21-Oct 20:00 21:30 BBC1 Once 0
Programming recordings without the
®
G Code System
Preparation:
•) Switch on the TV set, and if necessary, select the programme number for the
DVD recorder.
•) Switch on the DVD recorder.
1 Press TIMER s on the remote control.
2 Press the green button.
P
The current date will be displayed.
3 Enter the date using the number buttons 0..9
4 Confirm with OK .
How can I correct wrong entries?
If you have already confirmed the entry with OK , you can select one
of the following functions:
Repeat entry: Green colour button
Cancel: Red colour button
5 Enter the start time for the show using the number buttons 0..9 .
Confirm with OK .
6 Enter the finish time for the TV show using the number buttons
0..9 Confirm with OK .
7 Check the data you entered.
O
If necessary, go back a position to change entered data using
the green function button.
G-Code Manual Home
Schedule displays programmes for Watch or Record.
Press Bto use. Press the Red button for G-Code
recording. Press the Green button for Manual
recording. Press Dfor Search. Press Cfor Info.
Grid Search Schedule Info
No programmes