Recording From A Camera Connected To The Front Sockets - Philips G-Code HDRW 720/69 Operating Instructions Manual

Recording on the HDD
Recording from a camera connected to
the front sockets
Using this function, you can store recordings via the front sockets
directly on the HDD. These titles will be automatically protected to
prevent them from being automatically deleted in case the HDD is full.
F
The symbol ' ' indicates such a protection.
You can edit these recordings on the HDD and transfer (archive) them
later on a DVD+RW/+R disc. How you archive recordings on a
DVD+RW/+R you will read in the chapter 'Recording on a
DVD+RW/+R' in the section 'Archiving (storing) titles on a
DVD+RW/+R'.
Please observe the following:
•)
Any programmed recordings (TIMER) will not be carried out during
this operating mode.
•)
If there are any recordings in the time shift buffer, they will be
deleted. Therefore, store important recordings on the HDD
( REC/OTR n ). For more information on the time shift buffer,
read the chapter 'The Time Shift Buffer'.
Preparation:
•
Select the recording mode (button TUNER , button SYSTEM
MENU , 'Preferences', button C 'Camera mode') .
1 Connect the camera as described in the chapter ' Connecting
additonal devices/Connect camcorder to the front sockets'
2 Press CAM on the remote control.
P
The DVD recorder will switch to camera mode.
3 Select the socket to which the camera is connected using
CHANNEL q , CHANNEL r .
O
'CAM1'
For recordings from the VIDEO (CAM1) , S-VIDEO
(CAM1) sockets.
Switching between the two sockets is done automatically. If a
signal is available at both sockets at the same time, the signal at
the S-VIDEO (CAM1) socket has priority. If you change
socket (unplug), you must re-select the socket using
CHANNEL q (press twice).
O
'CAM2'
For recordings from the DV IN (CAM2) socket.
32
4 Press REC/OTR n to start the recording.
P
If no signal is available, no recording will be made or the
recording in progress will be stopped.
P
During the playback of a recorded 'copy protected' signal you
will see only that parts of the recording where no copy
protection can be recognised.
5 You can stop the recording using the following buttons:
PAUSE 9
O
The recording will be paused. If you press the button again,
the recording will resume.
A chapter marker is inserted.
STOP h
O
The recording will be interrupted. You can start a new
recording by pressing REC/OTR n .
A new title is created.
6 Press CAM to terminate the camera operating mode.
P
The recording will be stored on the HDD as a new title.