Presetting Am/Fm Stations - Integra DSR-4.8 Instruction Manual

Listening to the Radio—Continued
■ Tuning into Stations by Frequency
You can tune into AM and FM stations directly by enter-
ing the appropriate frequency.
1
Press the [Search] button.
2
Within 8 seconds, use the num-
ber buttons to enter the fre-
quency of the radio station.
For example, to tune to 87.5 (FM),
press 8, 7, 5.

Presetting AM/FM Stations

You can store a combination of up to 40 of your favorite
AM/FM radio stations as presets.
1
Tune into the AM/FM station that
you want to store as a preset.
2 Press the [Memory] button.
The preset number flashes.
3
While the preset number is flash-
ing (about 8 seconds), use the
Preset [
a preset from 1 through 40.
4 Press the [Memory] button again
to store the station or channel.
The station or channel is stored and the
preset number stops flashing.
Repeat this procedure for all of your
favorite AM/FM radio stations.
Note:
This procedure can also be performed on the DVD
receiver by using its [Preset Memory] button and Tun-
ing/Preset [ ]/[ ] button. First press the [Preset Mem-
ory] button, use Tuning/Preset [ ]/[ ] button to select a
preset and then press the [Preset Memory] button again.
40
]/[ ] buttons to select
Selecting Presets
To select a preset, use the Preset
[ ]/[ ] buttons.
Notes:
• This procedure can also be performed by using the
number buttons.
To enter, for example, "12", press the [1] button fol-
lowed by the [2] button.
• This procedure can also be performed on the DVD
receiver by using its Tuning/Preset [ ]/[ ] button.
Deleting Presets
1
Select the preset that you want to
delete.
See the previous section.
2 Press the [CLR] button twice.
The preset is deleted and its number
disappears from the display.