Table of Contents
Advertisement
3-26 Setting Up Your Server
MAKING BACKUP COPIES OF SYSTEM INFORMATION
The system information includes the current BIOS settings and any specific information for the
server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive and reboot the
system.
2.
Select [Maintenance Tools (Normal mode)].
3.
Select [English].
4.
Select [Maintenance Utility].
5.
Select [System Information Management].
6.
Insert a floppy disk into the floppy disk drive.
7.
Select [Save].
IMPORTANT:
Configuration] - [Shared BMC LAN] in BIOS SETUP, the procedures
described above will fail to make backup copy of system information
correctly. Change BIOS setting to "Disabled" before making backup
copy. [Shared BMC LAN] option is factory-set to "Disabled".
If "Enabled" is selected for [Server] - [BMC LAN
Advertisement
Table of Contents
Troubleshooting
