Installing And Setting Device Drivers - NEC Express5800/R140a-4 User Manual

Installing and Setting Device Drivers

Follow these steps to install and configure the device drivers.
Setting for Receive Side Scaling
You need to change setting for the factory-installed network adapters (Intel(R) PRO/1000 EB
Network Connection with I/O Acceleration and Intel(R) PRO/1000 EB Network Connection with
I/O Acceleration #2).
IMPORTANT: With Windows Server 2003, perform the following
steps before installing Intel(R) PROSet.
1.
Open [Control Panel]. Under [System and Maintenance], click [Open Device Manager] to
start [Device Manager].
2.
Open [Network adapters], and then double-click [Intel(R) PRO/1000 ∼].
3.
Select [Advanced], change [Receive Side Scaling] to "Disabled".
4.
Click [OK].
5.
Restart the system.
Now the setting is complete.
IMPORTANT: With Windows Server 2003, [Receive Side Scaling]
may not appear if the Intel(R) PROSet has already been installed. In
this case, you need to uninstall the PROSet before changing [Receive
Side Scaling]. See "PROSet" for how to uninstall PROSet.
Installing the Operating System with Express Setup 5-19