Graphics Accelerator Driver - NEC Express5800/R140a-4 User Manual

Installing Disk Array Controller Driver (N8103-90)
If you use the Disk Array Controller N8103-90, you do not need to install the driver manually. It is
automatically installed by Windows Plug-and-Play.
Installing RAID Controller Driver (N8103-115)
Please refer to the manual that comes with the RAID Controller.
Installing SAS Controller Driver (N8103-104)
If you utilize SAS controller N8103-104, update your system with NEC EXPRESSBUILDER DVD
attached to your system.
The SAS controller driver will be installed automatically.
Installing SCSI Controller Driver (N8103-107)
If you use the SCSI Controller N8103-107, update your system with NEC EXPRESSBUILDER
DVD attached to your system.
The SCSI Controller driver will be installed automatically.

Graphics Accelerator Driver

Standard graphics accelerator drivers that are mounted will be installed automatically. The
following is the procedure when it is necessary to install manually.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "install.bat" in the following directory.
\001\win\winnt\dotnet\video\install.bat
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, follow the
direction on the screen and restart the system.
Installing the Operating System with Express Setup 5-27