Universal Raid Utility; Setup With Express Setup; Manual Setup - NEC Express5800/R140a-4 User Manual

6-20 Installing and Using Utilities

Universal RAID Utility

Universal RAID Utility is an application to manage or monitor the following RAID Controllers.
On-board RAID (MegaRAID ROMB)
N8103-115 RAID Controller (512 MB, RAID0/1/5/6)
Before attempting to operate Universal RAID Utility, read the "Universal RAID Utility User's
Guide" included in NEC EXPRESSBUILDER DVD. The manual explains the Universal RAID
Utility installation procedure and notes on operating Universal RAID Utility.

Setup with Express Setup

You can install Universal RAID Utility with Express Setup contained in NEC EXPRESSBUILDER
DVD. When you start the Express Setup, a dialog to specify an application appears. Select
[Universal RAID Utility] on the dialog.

Manual Setup

Windows
You can start the setup program of Universal RAID Utility from [Autorun Menu].
Click to [Setup Software] → [Universal RAID Utility] in [Autorun Menu].
You need to install the following software.
Microsoft .NET Framework 2.0
The Runtime component of the Microsoft Visual C++ 2005 SP1
You can install these software from [Autorun Menu] too.
Click [Setup Windows] → [Install the .NET Framework Ver 2.0 Redistributable Package (x86)] (If
CPU architecture is x64, [Install the .NET Framework Ver2.0 Redistributable Package (x64)]) in
[Autorun Menu] for the setup of Microsoft.NET Framework 2.0.
Click [Setup Windows] → [Install the Microsoft Visual C++ 2005 SP1 Redistributable Package
(x86)] (Use the x86 package whatever the CPU architecture may be.) for the setup of the Runtime
component of the Microsoft Visual C++ 2005 SP1.