Introductory Information; Checking The Supplied Accessories; How To Use This Manual; Preparing The Remote Control - Pioneer VSA-E03 Operating Instructions Manual

Introductory Information

Checking the Supplied Accessories

Please check that you have received all of the following accessories with the amplifier.
Remote control unit

How to Use This Manual

This manual is divided into two main sections :
SET UP
This section explains how to make the necessary
connections from the amplifier to your other audio and
video components. Amplifier operations described later
in this section under the heading "Preparations" enable
you to set up and customize your home entertainment
center.
OPERATION
This section provides complete information about
operation of the amplifier and supplied remote control.

Preparing the Remote Control

Loading the batteries
AA dry cell batteries (("AA" IEC LR6)×2)
\
When you notice a decrease in the operating range of
the remote control, replace all batteries with new ones.
When changing the batteries, it is
memo
recommended that you load new batteries
within five minutes of removing the old
batteries. If not, the preset codes may be
canceled and you will need to set them again
(refer to page 20).
"AA" IEC LR6 batteries x 2
The following marks and symbols are used throughout
this manual:
Provides additional information, precautions,
memo
and advice.
Indicates a blinking button, indicator, or
display.
Indicates a steadily lit button, indicator, or
display.
CAUTION!
Incorrect use of batteries may result in such hazards
as leakage and bursting. Observe the following
precautions.
• Never use new and old batteries together.
• Insert the plus and minus sides of the batteries
properly according to the marks in the battery case.
• Batteries with the same shape may have different
voltages. Do not use different batteries together.
5
En