How To Set Up A Gateway-To-Gateway Vpn Configuration - NETGEAR DG834G Reference Manual

How to Set Up a Gateway-to-Gateway VPN Configuration

Note: This section uses the VPN Wizard to set up the VPN tunnel using the VPNC
default parameters listed in
not covered by these VPNC-recommended parameters, refer to
VPN Tunnels in Special Circumstances" on page 8-38
Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard.
A
14.15.16.17
DG834G VPN
Firewall
192.168.0.1
PCs
Figure 8-19
Set the LAN IPs on each DG834G v3 to different subnets and configure each properly for the
Internet. The examples below assume the following settings:
Virtual Private Networking
Reference Manual for the ADSL Modem Wireless Router DG834G
Table 8-2 on page
VPN Tunnel
22.23.24.25
v1.3, March 2007
8-5. If you have special requirements
"How to Set Up
to set up the VPN tunnel.
B
DG834G VPN Firewall
192.168.3.1
PCs
8-21