NETGEAR DG834G Reference Manual page 34

Reference Manual for the ADSL Modem Wireless Router DG834G
c. Connect the power adapter to the firewall and plug it in to a power outlet. Verify the
following:
The power light is lit after turning on the firewall.
The test light comes on briefly, then goes off.
The wireless light is lit after turning on the firewall.
The ADSL light is green, indicating you are connected to the ADSL network.
d. Now, turn on your computer. If software usually logs you in to your Internet connection,
do not run that software. Cancel it if it starts automatically. Verify the following:
The local lights are lit for any connected computers.
3. Log in to the modem router.
Note: Your computer needs to be configured for DHCP. For instructions on
configuring for DHCP, please see the documentation that came with your
computer or
a. Type http://Default IP Address Variable in the address field of a browser such as Internet
Explorer or Netscape
Figure 3-9
3-8
"Preparing a Computer for Network Access" in Appendix
Navigator.
®
v1.3, March 2007
Configuring Your Internet Connection
C.