Deleting Channels; Changing Channels; Adjusting The Volume - Insignia NS-LCD37HD-09 User Manual

Insignia NS-LCD37HD-09 37" LCD TV
4 Press or to highlight Auto Scan, then
press or ENTER.
Picture
Cable System
Start to Scan
Select
5 Press or to highlight Cable System,
then press or
system you have. You can select STD, IRC,
HRC, or AUTO. If you do not know the type of
cable system, select AUTO.
6 Press or to highlight Start to Scan, then
press or ENTER to start the scan. Your TV
scans for analog and digital cable channels
and stores the channel information in the
channel list.
Note
If you want to stop the scan, press MENU.

Deleting channels

You can delete a channel from the channel list
so your TV skips the channel when you press
CH+ or CH–. You can still tune to the channel
using the number buttons.
To delete a channel:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
Select
2 Press or to select Channel, then
press . The Channel menu opens.
Picture
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Select
Time Setup Lock Channel
AUTO
Move
Exit
MENU
to select the type of cable
Time Setup Lock Channel
Standard
50
50
50
0
50
Cool
Move
Exit
MENU
Time Setup Lock Channel
Air
2-1
WGBH-SD
: Good
Move
Exit
MENU
www.insignia-products.com
3 Press or to highlight Show/Hide, then
press or ENTER. The channel list opens.
Picture
No. Program Name
1-2 Sencore
2-0
2-1 WGBH-SD
2-2 PBS-HD
2-10 WGBH-Dx
6-0
7-0
11-1 MBC DTV
12-0
14-0
Select
4 Press or to highlight the channel you
want to delete, then press ENTER to mark
the channel. A check mark disappears if the
channel is deleted. The check mark appears
if you add back the channel.
Note
If the list has more than one page, press
to scroll through the pages.
5 Press EXIT to close the menu.

Changing channels

Some digital channels may have sub-channels.
The main digital channel broadcasts the
program. A sub-channel may broadcast a variety
of information depending on the broadcaster. For
example, a sub-channel may broadcast a
second language, weather forecast, or
advertising.
To change channels:
• Press CH+ or CH– to tune to the next or
previous channel in the channel list.
• Press the number buttons for the channel you
want, then press ENTER to tune to the
channel immediately or wait a few seconds
for the channel to change automatically.
If you want to tune to a digital sub-channel,
press the number buttons for the main
channel, press
button for the sub-channel. For example, to
tune to sub-channel 3 of main channel 8,
press 8, press
presses must be within two seconds of each
other.
• Press RECALL to tune to the last viewed
channel.
• Press CH.LIST to open the channel list,
press or to highlight a channel, then
press ENTER.
• Press FAVORITE to open the favorite list,
press or to highlight a channel, then
press ENTER.

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease
the volume.
• Press MUTE to turn off the sound. Press this
button again to turn the sound back on.
Time Setup Lock Channel
Show
Next
Move
Exit
MENU
or
, then press the number
, then press 3. Button
13