Standby Mode Energy Savings; Watching Broadcast Tv Channels; Changing Channels; Viewing Program Information - Insignia NS-24ER310NA17 User Manual

Standby mode energy savings

When you turn off your TV, it may remain in a higher power mode for a few minutes, after which it goes into a very low
power standby mode. If you turn on the TV again before it has entered the very low power mode, it turns on
immediately. After the TV goes into the lower power standby mode, it takes a bit longer to start up.

Watching broadcast TV channels

To watch broadcast TV, select the Antenna TV tile in the Home screen. Your TV remembers the last channel you
watched and starts with that channel playing.
Tip
You also can use the
Back jacks

Changing channels

To change channels, you can do any of the following:
• Press the UP arrow to change to the next higher channel.
• Press the DOWN arrow to change to the next lower channel.
• Press the LEFT arrow to display the channel list, and then press the UP and DOWN arrows to move the highlight
through the list one channel at a time. Or press REWIND and FAST FORWARD to move the highlight through the list
one page at a time. When you've highlighted the channel you want to watch, press OK. (If you decide you don't want
to change channels, press the RIGHT arrow or BACK button).
• Press to switch to the previously tuned channel.
Note
If
Jump Back button on a universal remote. For more information, see
page 91.

Viewing program information

To view information about the current program, press OK. Your TV displays a banner at the bottom of the screen with as
much information as is available in the program data stream, as shown in the following example.
Program information, subject to availability within the broadcast information, includes:
• Channel number
• Channel call sign
• Signal strength
• Program title
• Start time, end time, and graph of program length showing current position
• Content rating
• Video resolution (480i, 480p, 720p, 1080i, 1080p)
• Audio quality (Mono Dolby Digital, Stereo Dolby Digital, 5.1 Dolby Digital, Dolby Digital+)
• Audio features (SAP)
• Closed captioning (CC)
• Current time
• Program description. If the entire description does not fit, press OK to expand the size of the banner and see the entire
description.
65
/INPUT button on the TV to select Antenna TV, as explained in
on page 17.
is not available on your remote control, you can use
www.insigniaproducts.com
24"/32" 720P, 48" 1080P, 60Hz, LED Roku TV
on the Roku App or the
Other devices on