Left Side; Remote Control - Insignia NS-LCD37HD-09 User Manual

Left side

# Component
1 AV2 IN/S-VIDEO
2 AV2 IN-VIDEO
3 AUDIO-R/AUDIO-L Connect the audio for the S-Video
4 Headphone
6
Description
Connect an S-Video device to this
jack.
Connect an AV device to this jack.
device or AV device connected to
the AV2 video jacks.
Connect headphones to this jack.
www.insignia-products.com
Insignia NS-LCD37HD-09 37" LCD TV

Remote control

# Button Description
1 Press to turn on your TV. Press again
(Power)
to put your TV in Standby mode.
2 ZOOM Press to select the aspect ratio. You
can select Normal, Wide, Zoom, or
Cinema. For more information, see
"Selecting the aspect ratio" on page
16.
3 INPUT Press to open the INPUT SOURCE
menu, then press
the video input source. You can select
TV, AV1, AV2, S-Video1, S-Video2,
Component1, Component2, HDMI1,
HDMI2, HDMI3, or VGA.
4 COMP Press once to select the device
connected to the COMPONENT1
jacks. Press twice to select the device
connected to the COMPONENT2
jacks.
5 HDMI Press once to select the device
connected the HDMI1 jack. Press
twice to select the device connected
to the HDMI2 jack. Press three times
to select the device connected to the
HDMI3 jack.
6 Numbers Press to enter channel numbers or
the parental control password.
7 RECALL Press to go to the last viewed
channel.
8 VOL+/VOL– Press to increase or decrease the
volume.
9 MUTE Press to turn off the sound. Press
again to turn on the sound.
10 GUIDE Press to open the DTV program guide
(if available). For more information,
see "Displaying the DTV program
guide" on page 20.
or to select