Setting Up Your Tv - Insignia NS-42 User Manual

Setting up your TV

Installing batteries into the remote control
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two AA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the
+ and – symbols in the battery compartment.
3 Replace the cover.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the batteries leak,
clean the battery compartment with a cloth. If chemicals
touch your skin, wash immediately.
• If the remote control is not going to be used for an extended
period of time, remove the batteries.
8
Connecting power
To connect your TV to a power outlet:
•
Connecting external speakers
1 Connect the speaker audio cables to the
external speaker output jacks on the TV
matching the + and - ends of the cables with
the color on the jacks.
www.insignia-products.com
Insignia NS-42LCD 42-inch LCD TV
Plug the power cord into a standard
AC power outlet.
Notes
• Make sure that you use the correct type of
power. See the label on your TV.
• If you do not intend to use your TV for an
extended period of time, unplug the power cord
from the electrical outlet.
Notes
• Unplug the TV set and all connected
components before connecting the speakers.
• The illustration may differ from your model.