Insignia NS-46D400NA14 Quick Setup Manual

QUICK SETUP
GUIDE
46"/50" LED TV
NS-46D400NA14
NS-50D400NA14
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
Included accessories
Remote control and
two AAA batteries
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Stand column
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You'll need: A Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect the screen
from damages and scratches.
B Secure the stand column to the TV using the ve provided M4 × 10 mm screws.
C Secure the TV stand to the stand column using the four provided M4 × 27 mm screws.
- OR -
How do I prepare my TV for wall mounting?
A Carefully place your TV face-down on a cushioned, clean surface to protect the screen
from damages and scratches.
B Locate the mounting screw holes on the back of your TV. See the instructions that came
with your wall mount for more information about how to correctly mount your TV.
Which cables do you have?
Your TV has several di erent jacks for connecting devices. For the
STOP!
best video quality, use the best available connection. Use the cables
that came with your devices.
Do not plug your
power cord in until all
VIDEO QUALITY
other devices have
been connected.
BEST
BETTER
Component video and analog audio
GOOD
Composite video and analog audio
GOOD
Note: You can use the HDMI 3/DVI jack to connect a DVI device to your TV. Attach an
HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device's jack. See your online User Guide for more information about di erent types of
HDMI (ARC, DVI, MHL).
Features
Front view
46"
Remote control sensor
Power indicator
M4 screws
(10 mm length)
Back view
Power connector
(5 pcs.)
M4 screws
TV stand
(27 mm length)
(4 pcs.)
Note: Images do not necessarily represent the exact design of your television.
A
A
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) and/or connect a device such as a DVD or
Blu-ray Disc player, game station, MHL-enabled device, Roku streaming stick, or camcorder?
JACK TYPE CABLE CONNECTOR
Using an HDMI cable (BEST)
HDMI video/audio
Coaxial video/audio
Using component cables (BETTER)
- OR -
Using an AV cable (GOOD)
50"
Power indicator
Remote control sensor
How do I connect my TV to an antenna or cable wall jack?
Before using your new product, please read these instructions to prevent any damage.
M4 × 10 mm C
B
Front
B
Multi-purpose jacks: You can plug
any device that uses HDMI into any
HDMI jack. However, certain devices
must be connected to the HDMI ARC,
MHL, or DVI jacks. See the instructions
that came with your ARC, MHL, or DVI
device for more information.
Note: The component video and AV
jacks are shared. This means you
AUDIO/VIDEO OUT
Component cable option
connect
AV device at a time. We suggest using
HDMI if your device supports it.
Note: Connect the yellow video cable
AUDIO/VIDEO connector to the green Y/VIDEO jack
OUT
on the back of your TV.
AV cable option
CABLE
M4 × 27 mm
can
only one component video or
OVER