Features - Insignia NS-42 User Manual

Insignia NS-42LCD 42-inch LCD TV
Note to CATV system installer
This reminder is provided to call the CATV
system installer's attention to Article 820-40 of
the NEC that provides guidelines for correct
grounding and in particular, specifies that the
cable ground must be connected to the
grounding system of the building as close to the
point of cable entry as practical.

Features

TV front
Item Description
1 Remote control sensor—Point the remote control at
this sensor while pressing the remote's buttons.
1
www.insignia-products.com
TV top
1 2 3
Item Description
1-2 CH-/CH+—Press to change channels. While in an
OSD menu, press to highlight options.
3-4 VOL-/VOL+—Press to change the volume. While in an
OSD menu, press to adjust the value of an option.
5 MENU—Press to access the OSD menu's main page.
6 INPUT—Press to select the input signal source.
7 POWER—Press to turn the TV ON (from Standby
mode) or to activate Standby (from On mode).
Notes
• POWER, CH+/-, VOL+/-, INPUT, and MENU
buttons on the TV have the same functions as
the corresponding buttons on the remote
control.
• This user guide describes procedures based
on using the remote control, not the TV
controls.
4 5 6 7
5