Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source - Insignia NS-37L760A12 User Manual

11 Press or to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press ENTER.
If you chose Antenna or Cable, your TV
automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
During auto channel search, your TV searches
for digital channels first. When the digital
channel search is complete, a message appears
asking if you want to search for analog channels.
Select Yes to continue searching for analog
channels, or select No to stop searching for
channels.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
12 To watch TV, press INPUT, press
highlight the video input source for your TV in
the Input Source list, then press ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI1, HDMI2, or HDMI3.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component.
• If your TV is connected to a cable or satellite
box using a composite video cable, select AV.

Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to
your TV and to a power outlet.
2 Press (power) to turn on your TV. The power
indicator LED turns blue.
3 Press (power) again to turn off your TV. Your
TV enters Standby mode and the power
indicator LED turns red.
22

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The Input
or to
2 Press
You can also press a Quick Launch input button to
select the video input source.
• Press TV to select TV.
• Press COMP or VIDEO to select Component/AV
• Press HDMI once to select HDMI 1. Press twice to
www.insigniaproducts.com
NS-37L760A12 Insignia 37" LCD, 60Hz 1080p
Source list opens.
Note
If the Input Sensor feature is turned on (default
setting), the device connected to the video jack must
be turned on to select it in the Input Source list.
For more information, see "Turning Input Sensor on
or off" on page 40.
Input Source
TV
Component/AV
VGA
HDMI 1
HDMI 2
HDMI 3
USB
or to highlight a video input source,
then press ENTER.
select HDMI 2. Press three times to select HDMI 3.