Back; Remote Control - Insignia NS-L19X-10A User Manual

Back

3 4
1 2
# Jack Description
Connect a digital optical cable to this jack to output a
digital audio signal to a digital audio amplifier. For
1 DIGITAL OUTPUT
more information, see "Connecting a digital sound
system" on page 12.
Connect an HDMI device, such as a cable box or DVD
player, to this jack. An HDMI cable carries both video
2 HDMI1/HDMI2 and audio, so you do not need to make an audio
connection. For more information, see "Connecting an
HDMI device" on page 10.
Connect the audio and video outputs from your
3
VGA AUDIO/VGA PIC computer to these jacks. For more information, see
"Connecting a computer" on page 11.
Connect the video and audio output from an AV device
AV1 VIDEO and L/R
4 to this jack. For more information, see "Connecting a
AUDIO
VCR" on page 9.
Connect the video and audio output from a
COMPONENT1 IN Y,
component video device to these jacks. For more
5 Cb/Pb, Cr/Pr and L/R
information, see "Connecting a component video
AUDIO
device" on page 10.
Connect these jacks to an external audio amplifier to
hear your TV sound through a stereo amplifier. For
6 AUDIO OUT L/R
more information, see "Connecting an audio
amplifier" on page 11.
Connect an antenna, cable TV, or cable/satellite box
output cable to this jack. For more information, see
7
RF
"Connecting an antenna, cable TV, or satellite TV box"
on page 9.
For service only. Do not use.
8 RS-232
Connect the S-Video output from a video device such
as a DVD player, camcorder, or game console to this
9 S-VIDEO 1
jack. For more information, see "Connecting a VCR' on
page 9.
Connect an HDMI device, such as a cable box or DVD
player, to this jack. An HDMI cable carries both video
10 HDMI 3 and audio, so you do not need to make an audio
connection. For more information, see "Connecting an
HDMI device" on page 10.
6
10
11
12
13
14
15
7 9
6
5
8
www.insigniaproducts.com
# Jack Description
Service port for upgrading firmware. Do not use.
11 SERVICE PORT
Connect the 75 ohm coaxial cable from an FM antenna
12 FM
to this jack.
Connect headphones to this jack. For more
13 information, see "Connecting headphones" on page
(headphone)
12.
Connect the video and audio output from an AV device
AV2 IN VIDEO/S-VIDEO2
14 to this jack. For more information, see "Connecting a
and L/R AUDIO
camcorder or game" on page 10.
Connect the video and audio output from a
COMPONENT2 IN Y,
component video device to these jacks. For more
15 Cb/Pb, Cr/Pr and L/R
information, see "Connecting a component video
AUDIO
device" on page 10.

Remote control

1
2
3
4
5
6
7
8
9
10
11
# Button Description
Press to turn your TV on or off (standby mode). When
1 your TV is turned off, power still flows into it. To
(power)
disconnect all power, unplug the power cord.
Press to select the aspect ratio of the picture. You can
select Normal, Zoom, Wide, Cinema, or Auto
2 ZOOM
Zoom. For more information, see "Adjusting the TV
picture" on page 16.
Press to select a component input source. Press once
3 COMP
for Component 1. Press twice for Component 2.
Press to select an HDMI input source. Press once for
4 HDMI HDMI 1. Press twice for HDMI 2. Press three times for
HDMI 3.
Press to directly enter channel or FM radio frequency
5 Numbers
numbers, or to enter the Parental Control password.
Press to increase or decrease the volume.
6 VOL +/VOL –
12
13
14
15
16
17
18
19
20
21
22
23
24
25