Hree Way Onferencing; Call; Way C Onferencing; Three-Way Conferencing - GE 27909 User Manual

Handset to Handset Intercom Call
1. Make sure the originating phone is OFF (not in talk mode).
. Press the menu button and use the cid/vol (3or4) button to scroll to Intercom.
. Press the menu button to enter the menu. The screen displays INT - Number? .
4. Use the touch-tone pad to input the number of the handset you want to page.
(For example: press 1 to page handset 1.)
5. The receiving handset is paged and emits a tone.
NOTE: To cancel the page, press the talk/call back button on the
originating handset.
6. Wait for the person at the receiving handset to press the talk/call back button.
NOTE: If the receiving handset does not answer within two minutes,
the intercom call is automatically canceled and the originating
handset screen displays NO ANSWER.
7. When finished, press the talk/call back on either handset to deactivate the
intercom.

Three-way Conferencing

You may have a -way conversation using the handset, the base and an open line.
1. When the phone rings, press the talk/call back button on the handset and press
the Speaker button on the base.
. The handset creen displays Conference y. And when the conference starts, all the
 parties will hear conference alert tone.
. When finished, press the talk/call back button (or put the handset back into the
base cradle) and press the Speaker button again to hang up.
NOTE: If the phone system is expanded to more than one handset,
only 2 handsets and the base will be allowed in a telephone line
conference. When the third handset tries to join the conference,
Unavailable will be shown with error beeps. When a handset is in
use (in talk mode), the other handset(s) will show Line in use.
0