Ones; Uto Alk; Auto Talk - GE 27909 User Manual

Tones
From the Setup HS Menu:
1. Press the cid/vol (- or +) button to scroll to the Tones sub-menu.
. Press menu button to confirm and you may program the following items: Low
Battery, No Coverage and Key Tone.
. Use the cid/vol (3or4) button to scroll to the item you want to program and
press menu button to enter.
Low Battery - You may set the warning beep to "On" when your handset battery
is low, so as to alert you to charge the battery. Press the cid/vol (3or4) button to
scroll to On or Off, then press menu button to save the setting. The default setting
is On.
No Coverage - You may set the warning beep to "On" or "Off" when the handset
is out of range. Press the cid/vol (3or4) button to scroll to On or Off, then press
menu button to save the setting. The default setting is On.
NOTE: When the handset is in the idle (off) mode and is out of range
from the base unit the screen displays Searching. If the talk/
call back button is pressed, the screen briefly displays Unavailable
then returns to Searching.
Key Tone - You may set the key tone to "On" or "Off" when you press buttons.
Press the cid/vol (3or4) button to scroll to On or Off, then press menu button to
save the setting. The default setting is On.

Auto Talk

This option allows you to pick up the handset from base to answer an incoming call
without pressing the talk/call back button.
From the Setup HS Menu:
1. Press the cid/vol (3or4) button to scroll to the Auto Talk sub-menu.
. Press menu button to enter the menu. Use the cid/vol (3or4) button to scroll to
your selection. The default setting is On.
. Press the menu button to save your selection.
18