Important Safety Information; General Tool Safety Warnings - Central Machinery 32208 Set Up And Operating Instructions Manual

SAVe thiS mANUAl
Keep this manual for the safety warnings
and precautions, assembly, operating, inspec-
tion, maintenance and cleaning procedures.
Write the product's serial number in the back
of the manual near the assembly diagram (or
month and year of purchase if product has no
number). Keep this manual and the receipt in
a safe and dry place for future reference.
impOrtANt SAFetY
iNFOrmAtiON
in this manual, on the labeling, and
all other information provided with
this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
which, if not avoided, will result
in death or serious injury.
which, if not avoided, could
result in death or serious injury.
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
related to personal injury.
SKU 32206/32208
DANger indicates a
hazardous situation
WArNiNg indicates a
hazardous situation
CAUtiON, used with
the safety alert
NOtiCe is used to
address practices not
For technical questions, please call 1-800-444-3353.
used to address practices not
related to personal injury.

general tool Safety Warnings

WArNiNg read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Save all warnings and instructions
for future reference.
1. KEEP GUARDS IN PLACE and in work-
ing order.
2. REMOVE ADJUSTING KEYS AND
WRENCHES. Form habit of checking to
see that keys and adjusting wrenches
are removed from tool before turning it
on.
3. KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
4. DON'T USE IN DANGEROUS ENVI-
RONMENT. Don't use power tools in
damp or wet locations, or expose them
to rain. Keep work area well lighted.
5. KEEP CHILDREN AWAY. All visitors
should be kept safe distance from work
area.
6. MAKE WORKSHOP KID PROOF with
padlocks, master switches, or by remov-
ing starter keys.
7. DON'T FORCE TOOL. It will do the job
better and safer at the rate for which it
was designed.
8. USE RIGHT TOOL. Don't force tool or
attachment to do a job for which it was
not designed.
CAUtiON, without the
safety alert symbol, is
PAGE 3