Starting The Engine With Remote Control (Optional Part) - Honda EU6500is Owner's Manual

OPERATION

Starting the engine with remote control (optional part)

1. Determine the voltage requirements and adjust the voltage selector
switch, as needed.
2. Turn the fuel valve lever to the ON position.
3. Turn the engine switch to the REMOTE (far left) position.
REMOTE
4. Press and hold the START button on the remote control until the
PILOT lamp illuminates. The START button will automatically be
disabled after the engine starts.
If the engine fails to start within 5 seconds, release the button and
wait at least 10 seconds before operating the starter again.
Using the electric starter for more than 5 seconds at a time will
overheat the starter motor and can damage it.
PILOT LAMP
30
O O F F F F
ENGINE SWITCH
FUEL VALVE LEVER
O O N N
START BUTTON
OFF