Table of Contents
Advertisement
Starting the engine with remote control (optional part)
1.
Determine the voltage requirements and adjust the voltage selector
switch, as needed.
2.
Turn the fuel valve to the ON position.
3.
Turn the engine switch to the REMOTE (far left) position.
4.
Press and hold the start button until the engine pilot lamp
illuminates. The start button will automatically be disabled after the
engine starts.
If the engine fails to start within 5 seconds, release the button, and
wait at least 10 seconds before operating the starter again.
Using the electric starter for more than 5 seconds at a time will
overheat the starter motor and can damage it.
PILOT LAMP
O
O
F
F
F
F
REMOTE
ENGINE SWITCH
ON
OFF
FUEL VALVE
START BUTTON
OPERATION
29
Advertisement
Table of Contents
