Operating More Than One Handset; Call Allocation For Incoming Calls - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap16.fm5 Seite 76 Freitag, Juli 9, 1999 2:26 PM
9.7.99

Operating more than one handset

Operating more than one handset

Call allocation for incoming calls

Collective call group
Call group 1
Call group 1
Switching between collective call and ring priority
m t Service
REDIAL
76
kap16.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
It is possible to set how incoming calls should be signalled
when operating several handsets. A distinction is made
between:
Collective call (factory default) – incoming calls are
l
signalled to all registered handsets.
You can exclude individual handsets from the collec-
tive call group and reintegrate previously excluded
handsets.
Ring priority – incoming calls are first signalled at a
l
Call group 2
preferred (prioritised) handset. If this party does not
accept the call, the system automatically forwards it
to the handsets assigned to the group after an de-
fined number of rings.
Call group 2
You can define which handset is assigned to the first
group and which are assigned to the second group.
Extensions that are not entered are excluded from
ring priority.
( t means: scroll with
Activate the Service menu item.
# 1
Start the setting procedure.
d
Enter the four-digit base code (factory default:"0000")
(' page 39).
* 2 3
The current setting is shown on the display:
:
*23 1
SET
1
Set collective call.
SET
or
2
Set ring priority.
SET
Z
, confirm with
OK
(Example:1 = collective call
is set)
SET
REDIAL
)