Suppressing Secret Numbers For Redial; Suppressing Call Number Display At The Called Party; No Answer Or Line Busy - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap06.fm5 Seite 14 Freitag, Juli 9, 1999 2:26 PM
9.7.99
External outgoing calls
Manually inserting a pause
t Pause
W

Suppressing secret numbers for redial

Suppressing call number display at the called party

No answer or line busy

14
kap06.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
If you repeatedly get the busy signal after entering the
country code, for example, when dialling en-bloc, insert a
pause (3 seconds) between the country code and the call
number:
( t means: scroll with
The pause "P" appears on the display.
:
0043P123456
< >
Call numbers dialled are stored in a redial list. Suffix-dialled
numbers, e.g. extensions, and any secret "service num-
bers" that may follow are also entered in the redial list
along with the call numbers. To avoid transferring secret
numbers, activate "TempSwitchToTone", for example, af-
ter entering the extension (' page 19). You telephone is
then set to DTMF signalling.
To suppress call number display at the called party's tele-
phone, use a T-Net services sequence. Your telephone
must be set to DTMF signalling.
w
Press the Talk key.
*31#
Enter the T-Net service sequence for call number sup-
pression, wait until you hear the dial tone and then
d enter the call number.
Replace the handset in the base station or charging unit.
The connection is cleared down.
or
e
Clear down the connection.
Z
, confirm with
_
{ W
The feature must be supported by the network
provider.
)
OK