Activating/Deactivating Call Unit/Call Charge Display - Gigaset 2011 Operating Instructions Manual

giga2011.bk : kap11.fm5 Seite 57 Freitag, Juli 9, 1999 2:26 PM
9.7.99

Activating/deactivating call unit/call charge display

m t Service
REDIAL
Activating/deactivating call unit or call charge display for the previous call
m t Service
REDIAL
kap11.fm5 Gig 2011 pocket, GBR PTT: A30852-X1101-B657-1-7619
Displaying call duration, call units and call charges
You can activate and deactivate call unit or call charge dis-
play. If display is activated, call duration display is
deactivated.
The display of call units or call charges is only
possible if you requested the call charge factor
from your local network provider.
You can display the total call units or the total call charges
for your extension or for an individual handset (' page 58)
and delete the total (' page 59) at any time.
( t means: scroll with
Select the Service menu item.
# 1
Start the setting procedure.
d Enter the four-digit base code (factory default: "0000").
9 6
The current setting appears on the handset display:
96 2 = activated, 96 0 = deactivated.
2
Activate call unit/call charge display.
SET
or
0
Deactivate call unit/call charge display.
SET
If the unit/charge display is activated after you seize a line,
you can display the units or charge incurred by the last call
w
by pressing
and guest houses for displaying the last call conducted.
The feature is deactivated by default. Any
modifications made affect all handsets.
( t means: scroll with
Select the Service menu item.
# 1
Start the setting procedure.
d Enter the four-digit base code (factory default: "0000").
* 0
The current setting appears on the handset display:
00 = deactivated, 01 = activated.
1
Activate call charge display after seizing a line.
SET
or
0
Deactivate call charge display after seizing a line.
SET
Z
, confirm with
)
OK
. This is important, for example, in hotels
Z
, confirm with
)
OK
57