Toyotomi FF-V30T Installation And Operation Instructions Manual page 16

After using the installation template as a guide for the
drilling of the hole for the exhaust pipe, the heater can
be installed normally, according to the procedure in the
illustration.
If the template is lost or the heater has to be moved,
these are the dimensions and locations of the holes for
the fuel pipe and exhaust pipe.
The center of the flue pipe
Do not remove any components from the
heater. Always contact your dealer if repairs
are required.
If the electricity cable is damaged, this may
only be replaced with type H05 VV-F and by
a recognised installer.
15
Back of the heater
78 mm
Fig. 3 Template