Toyotomi FF-V30T Installation And Operation Instructions Manual page 14

5. Unpacking
Save all packaging materials for possible future trans-
portation.
A) Remove the cardboard (drilling) template and the
user's manual from the packaging.
B) Remove the box with the installation kit from the
packaging.
C) Remove the heater from the packaging.
D) Remove the plastic bag containing the parts.
E) Remove the exhaust pipe from the bottom of thebox.
F) Check that all parts are present.
Only the standard feed and exhaust system
is supplied with the heater.
More than
30 cm
13
More than
1.5 m
Fig. 1: Gaps heater/exhaust pipe
More than
60 cm
FF-V30T
More than
10 cm
More than
30 cm