Install The Correct Line Fuse; Close The Unit - Agilent Technologies 6631B User Manual

D - Line Voltage Conversion

Install the Correct Line Fuse

Unscrew the line fuse cap from the rear panel and install the correct fuse.
♦
For 100/120 Vac operation: F4A; part number 2110-0055
For 220/230 Vac operation: F2A; part number 2110-0002
Mark the voltage setting that the unit has been set to on the rear panel label.
♦

Close the Unit

♦ Replace the outer cover.
Reconnect the power cord and turn on the unit.
♦
List of Fuses
F500 2110-0055
F500 2110-0002
F300 2110-0712
F301 2110-0712
F302 2110-0697
F302 2110-0685
F303 2110-0697
F303 2110-0685
F304 2110-0699
F305 2110-0777
F305 0811-3776
F310 2110-0025
70
1 Fuse, F4A, 250V (for 100/120 Vac input)
1 Fuse, F2A, 250V (for 220/230 Vac input)
1 Fuse, sub-min, M4A, 125V
1 Fuse, sub-min, M4A, 125V
1 Fuse, sub-min, M15A, 32V (66332A, 6632B, 6633B)
1 Fuse, sub-min, M7A, 125V (6634B)
1 Fuse, sub-min, M15A, 32V (66332A, 6632B, 6633B)
1 Fuse, sub-min, M7A, 125V (6634B)
1 Fuse, sub-min, M5A, 125V
1 Fuse, M8A, 32V (66332A, 6632B, 6633B)
1 Res Fusible 0.5 Ohm 5W (6634B)
1 Fuse, M15A, 32V (6631B)