Table of Contents
Advertisement
Monitor
If mounted with the supplied support, the monitor can be removed from the holder
for advanced theft protection.
Removing the monitor:
Push the release button on the back of the support and gently pull the monitor
upwards.
A
Do not push on the display screen to avoid damage of the LCD.
Installing the monitor:
Gently slide the monitor onto the support until it clicks into position.
Replacing batteries of the remote control
You have to replace the batteries of the remote control, if you use the remote control
outside of its holder and the navigation system does no longer respond to key presses.
Open the battery compartment on the
back of the remote control.
Remove the discharged batteries.
Insert two new LR6 type (Size AA)
batteries. Pay attention to correct
polarity (marked in the compartment).
Close the battery compartment.
Notes:
A
In many countries exhausted batteries may not be disposed of with your household
waste. Please determine how to dispose of exhausted batteries according to local
regulations.
A
Only use leak-proof batteries. Battery leakage can cause damage to the remote control
or to your car.
A
Never expose the remote control to direct sunlight or extreme heat. The batteries are
discharged and the risk of leakage is increased.
If you permanently use your remote control in its holder, we recommend that you
remove the batteries from the remote control.
Cleaning of the remote control and the monitor
Do not use lighter fluid, methyl alcohol or other solvents for cleaning. Only use a
damp cloth.
MAINTENANCE & CARE
43
Advertisement
Table of Contents
