Table of Contents
Advertisement
Basic menu page 5
Item
MARKER
Sets marker display ON/OFF.
DUR TIME
Sets the recording time
Setting the recoriding time
before shooting helps you with
making scenes of equal
duration.
When shooting with displaying
the recording time of the current
cut in the viewfinder (with the
REC TIME switch set to DUR),
the recording time indication
flashes to remind you that the
recording time has passed.
Setting the recording time in seconds
Move the cursor to DUR TIME, then press the MENU
dial.
A value of seconds appears.
If you turn the MENU dial when "59" is displayed, the
number under "MM" increased by one.
Settings
ON (normal value), OFF
Markers are displayed
when this setting is ON
and is not displayed
when it is OFF.
When the setting is ON,
go to advanced menu
page 4 to select the type
of marker (see page 91) .
00:00 to 59:59 (minute
to second)
See "Setting the
recording time in
seconds".
Basic menu page 6
Item
Settings
MARK/CUE
MARK (normal value), CUE
Selects Mark mode
See "ClipLink Shooting" (page 70).
or Cue mode
CHG REEL NO
See "To set the cassette name/
Sets the cassette
number" below.
name/number
To set the cassette name/number
Note
When using a cassette without cassette memory, you
cannot set the cassette name or number.
1
Load a cassette.
2
Press the MENU switch to move the cursor to
CHG REEL NO, then press the MENU dial.
The cursor (→) changes to the text entry arrow (↓)
and the current cassette name/number is displayed.
("NO TAPE" is displayed if you neglected to load
a cassette.)
Chapter 4 Viewfinder Screen Indications and Menus
Current cassette
name/number
(Continued)
85
Advertisement
Table of Contents
