Table of Contents
Advertisement
Location and Function of Parts
8 Zoom remote control connector (8-pin)
Connect the optional LO-26 Lens Remote Control Unit
for remote control of zooming.
9 RET (return) button
This allows you to check the video signal.
When the internal VCR is in recording pause mode,
press this button to review the last few seconds of the
recording in the viewfinder (recording review). When
an external VCR is connected, pressing this button
connects the E-E video signal
to the viewfinder while the internal VCR is recording
or no tape is inserted in the internal VCR.
For details, see "Playback — Checking Recorded Contents"
(page 63).
0 VTR button
This button starts and stops recording on the VCR.
Press it once to start recording, and once more to stop.
qa Instant automatic iris adjustment button
While using manual iris control, press this button to
switch temporarily to automatic iris control setting.
Automatic control is maintained as long as you hold
the button down.
qs IRIS selector
This selects the mode of iris operation. (See page
114.)
A (automatic): automatic iris
M (manual): manual iris
qd Motorized zoom lever
Use this to carry out a power zoom. Pressing the lever
harder increases the zoom speed.
W end: zoom toward wide angle
T end: zoom toward telephoto
..........................................................................................................................................................................................................
1) E-E video signal: "electric-to-electric" video signal.
This is an input video signal which has passed through
internal electrical circuits, but which has not been
converted to a magnetic signal.
28
Chapter 1 Overview
1)
from the external VCR
Advertisement
Table of Contents
