Sony DVCAM DSR-300AK Operating Instructions Manual page 43

3 Switch name displays
Stickers (supplied with RM-LG1) can be attached here
to indicate which functions are assigned to switches 1
and 2 2.
4 Velcro
When using the unit on the panning rod of the tripod,
this is used to attach the unit to the panning rod
mounting bracket (supplied with RM-LG1).
5 Cable clamp groove
When the cable 1 is passed underneath the unit, the
cable can be placed in this groove.
Attaching the RM-LG1
Use the binding ties and panning rod mounting bracket
to attach the unit to a panning rod.
Panning rod mounting bracket
Binding ties
Removing the RM-LG1
Lift up the tab to loosen the binding ties.
By connecting the RM-VJ1 Remote Control Unit to
the camcorder, you can control the camcorder while
watching the image on the LCD screen of the Remote
Control Unit.
Be sure to use the CCA-7-7A Cable only when
Velcro
connecting the RM-VJ1.
When using a conventional lens, such as the VCL-
918BY, you can control the zoom if you use the
optional lens cable (Sony product number: 1-790-779-
11). For details on the cable, contact your Sony dealer.
Panning rod
Using the Optional RM-VJ1
Remote Control Unit (Equipped
With Microphone And Monitor)
DSR-300A/300AP
REMOTE 2
CCA-7-7A cable
Note
The connection for controlling the zoom when using conventional lens
REMOTE2
RM-VJ1
Chapter 2 Fitting and Connections
RM-VJ1
Lens cable
REMOTE1
(1-790-779-11)
Remote control connector
(8-pin) for controlling the
zoom on the bottom of the
lens grip
43