Table of Contents
Advertisement
Location and Function of Parts
4 EZ ("easy") MODE button and indicator
Press this button (EZ mode on) when you want to
shoot immediately, with automatic adjustment of the
camcorder settings to standard values. (See page 93 for
EZ mode setting.) When this function is used, the iris
and the white balance are adjusted automatically. (The
total level control system functions.) Press this button
again to return the camcorder to the previous settings
(EZ mode off).
Note
When the RM-M7G Remote Control Unit is
connected, the "EZ mode" function is disabled.
5 ZEBRA button and indicator
Depress this button to display a zebra pattern (diagonal
stripes) in the viewfinder.
Depending on the zebra setting in advanced menu page
4 (see page 91), the zebra 1 for video levels between
70 to 90 IRE (or 70 to 90%) and the zebra 2 for video
levels 100 IRE or more (or 100% or more) can be
displayed independently or simultaneously.
6 A.IRIS (auto iris) MODE switch and indicator
When you use the auto iris function (by setting the iris
selector on the lens to A), set this switch to suit the
shooting conditions. Selecting BACK L gives more
light to back-lit subjects, and selecting SPOT L adjusts
for high contrast in spot-lit subjects. For normal
shooting, set this switch to STD.
7 MENU switch
When you press this switch to the ON position, the
basic menu is displayed. Keep pressing it to the ON
position to cycle through the various menu displays.
When you press the switch to the STATUS position,
the camcorder's status (of current settings) is
displayed.
8 W. BAL (white balance) switch
This selects the white balance setting from the preset
value, the value in memory A or the value in memory
B. (See page 107.) You can select the preset white
balance at 3200 K or 5600 K using the FILTER
control (3 on page 12). You can change the preset
color temperature on basic menu page 2. (See page
84.)
9 MENU dial
Use this dial to change menu pages or settings.
14
Chapter 1 Overview
0 POWER switch
Powers the camcorder on or off.
qa OUTPUT/DL/DCC+ (DynaLatitude/dynamic
contrast control plus) switch
Use this switch to select the DCC+ function, the
DynaLatitude function, or color bar output.
Select the CAM/DCC+ position in most cases.
CAM/DCC+: This activates the DCC+ function.
This prevents color faults when shooting high-
intensity subjects.
CAM/DL: This setting uses the DynaLatitude
function, which finely adjusts the contrast of each
pixel according to a histogram of luminance signal
levels. Access advanced menu page 2 to set the
DynaLatitude function ON or OFF. The
DynaLatitude effect can be set to any of three
levels, Low, STD (standard), and High with basic
menu page 2.
BARS: This setting displays color bars.
For details of menu operation, see Chapter 4 "Viewfinder
Screen Displays and Menus" (See page 77).
qs NG button
When using the ClipLink function during shooting,
you can designate a particular scene as "NG" (No
Good) by pressing this button before shooting the next
scene. Press the button again to cancel the NG setting.
qd GAIN switch
This selects one of the three gain settings, high,
medium or low. You can choose the gain values
assigned to the H, M and L settings from values from
–3 dB to 24 dB + DPR and hyper gain. (See page 90.)
The factory default selections are 18 dB (H), 9 dB (M)
and 0 dB (L).
Note
When the HYPER GAIN switch (7 on page 22) is in
the ON position, the GAIN switch has no effect.
qf ATW (auto tracing white balance) button and
indicator
Press this button, turning the indicator on, when you to
automatically adjust the white balance to follow
changes in the lighting conditions. (See page 108.)
Advertisement
Table of Contents
