Table of Contents
Advertisement
Viewfinder Screen Indications
Displaying the normal indications and
switching to the basic menu
To display the normal indications, move the POWER
switch to the ON position.
To switch to and from the basic menu, use the MENU
switch or MENU dial.
"CHECK DIAG" appears before basic menu page 1
when the self diagnostic function has detected an
abnormality (see page 87).
78
Chapter 4 Viewfinder Screen Indications and Menus
Display by holding the
MENU switch up while
the normal indications
are present.
Display by moving the
POWER switch to the
ON position.
Switch by pressing the
MENU switch down or
press and turn the
MENU dial downward.
Basic menu
a) The menu configuration differs according to the camcorder's
switch settings, the connected VCR, and the type of input
signal. A eight-page configuration results when all of the basic
menu pages are displayed.
Status indications
Normal indications
Page 1
Page 2
Page 8
a)
Advertisement
Table of Contents
