Table of Contents
Advertisement
Viewfinder Basic Menu
Basic menu page 2
Item
Settings
SKIN DTL
0.0 to 0.5 (normal value) to 1.0
Sets the amount of
Smaller values set a softer skin detail.
skin detail
correction.
DL LEV
LOW, STD (normal value), HIGH
Set the amount of DynaLatitude
Sets the
effects as high level, standard level
DynaLatitude level.
(STD), or low level.
PRE WHT
When the filter is 3200 or CROSS:
Sets the color
2200 to 3200 (normal value) to 4300,
temperature of the
filter 5600K, 5600K + 1/8ND
preset white
When the filter is 5600K + 1/64ND:
balance.
4600 to 5600 (normal value) to 12000
Basic menu page 3
This is displayed when the optional DSBK-501/501P
Analog Composite Input Board is fitted to the
camcorder.
Item
Settings
VIDEO IN
CAM (normal value)
Selects the signal
Records the signal shot by this
to be recorded onto
camcorder.
the internal VCR.
EXT
Records the signal input from the
GEN LOCK IN/VIDEO IN connector.
The image on the viewfinder and the
signal output from the MONITOR
OUT connector are switched to the
external video signal. When inputting
the external video signal, "EXT
INPUT" blinks on the screen.
84
Chapter 4 Viewfinder Screen Indications and Menus
If you set VIDEO IN to EXT and input an external VBS
signal from the GEN LOCK IN connector, the image in
the viewfinder and the signal output from the
MONITOR OUT connector are switched to the external
video signal. When inputting an external video signal is
input, "EXT INPUT" always blinks on the screen.
Notes
• When VIDEO IN is set to EXT, video signals are not
output from the S VIDEO OUT connector.
• When VIDEO IN is set to EXT, basic menu page 3 is
not displayed.
Basic menu page 4
This menu is displayed only when an external sync
signal is input to the VCR connected to the
camcorder.
Item
Settings
SC PHASE
000 (normal value) to 999
Sub carrier phase
adjustment for when
the camcorder is
a)
genlocked.
H. PHASE
000 to 135 (normal value) to 199
Horizontal phase
adjustment for when
the camcorder is
a)
genlocked.
a) This applies when using an external sync signal to
synchronize operation of several camcorders (see page
45).
Advertisement
Table of Contents
