Table of Contents
Advertisement
Installation
ITEM A: 1EA
SUPPORT, BRACKET
ITEM F: 1EA
FOAM SEAL
Have the following tools available for installation:
• Tight Fitting gloves
• Standard screwdriver
• Phillips screwdriver
• Pliers
Window Requirements
Size
Your air conditioner will install into standard
double hung windows with actual clear
opening widths of 27.6 to 41.5 inches (700mm
to 1054mm).
Lower sash must open sufficiently to allow a
clear vertical opening of 15.1 inches (383mm).
Side louvers and the rear of the air conditioner
must have clear air space to allow enough
airflow through the condenser for heat
removal. The rear of the unit must be
outdoors, not inside a building or garage.
WARNING: This product is a WINDOW AIR CONDITIONER.
As such, a standard single-hung or double-hung window is required
for proper installation. Non-window installations, including using
sleeves, holes in walls, and other installations are not recommended.
ITEM B: 1EA
LEVELING BOLT
LEVELING BOLT
ITEM G: 1EA
FOAM STRIP
• Sharp knife
• 3/8-inch open end wrench or
adjustable wrench
• 1/4-inch hex socket and ratchet
ITEM C: 1EA
ITEM D: 2EA
SCREW: 5/8"
ITEM H: 1EA
ITEM J: 1EA
L BRACKET
SIDE BRACKET
15.1" min. Inner sill
Interior wall
Installation
ITEM E: 7EA
SCREW: 5/8"
ITEM K: 1EA
DRAIN PIPE
• Tape measure
• Electric drill
• 1/4-inch drill bit
27.6" to 41.5"
Owner's Manual 11
Sash
Window
Offset
Sill
Exterior
Advertisement
Table of Contents
