InFocus LP280 User Manual page 33

System menu
Turn the features in the System menu on and off by highlighting
them and pressing
cates the feature is on; an empty box means the feature is off.
: This turns the image upside down for ceiling-mounted
• Ceiling
projection.
: This reverses the image so you can project from behind a
• Rear
translucent screen.
: When this feature is on, the projector automati-
• SourceSearch
cally searches for an active source. When it is off, you must
press the
Source/Select
or button on the remote to switch among sources.
Video
: This hides the on-screen display (OSD).
• Hide OSD
: This turns the Display Power Management Sys-
• DPMS enable
tem (DPMS) on. When it is on, the projector turns the lamp off
after 3 minutes of not detecting an active source. The projector
will return to normal activity immediately if it detects an active
source. After 5 additional minutes, the projector turns com-
pletely off. You must press the Power button to turn the projec-
tor back on. The LED blinks green when in DPMS mode.
: This turns the plug and play feature on and off.
• PnP enable
When it is On, most new computers will automatically recog-
nize the projector, then set the monitor resolution and refresh
rate accordingly. You need to set the Plug and Play setting to
Off for the projector to display properly on some older comput-
ers.
. A checkmark in the box indi-
Source/Select
button on the keypad or the
F 16
IGURE
System menu
Computer
25