InFocus LP280 User Manual page 18

S e t t i n g
NOTE: The USB mouse is
supported for use with
Windows 98 or higher only.
NOTE: You do not need to restart
your computer after connecting a
USB mouse to use it (it is hot-
pluggable). You must restart your
computer after plugging in a PS-2
10
u p t h
Do you want to control the computer's mouse from the projector's
remote?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
1 Plug the green end of the PS/2 mouse cable into the mouse
connector on your computer.
2 Plug the black end of the PS/2 mouse cable into the
"PS2/RS-232" connector on the projector.
If your computer has a USB connector and is running Windows 98,
use the USB mouse cable.
1 Plug the flat end of the USB mouse cable into the mouse con-
nector on your computer.
2 Plug the square end of the USB mouse cable into the "USB"
connector on the projector.
You must have the appropriate USB drivers installed on your
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
Now you're ready to power up the projector and your computer.
Skip to "Powering up the Projector" on page 13.
mouse.
e P r o j e c t o r