Setting Up The Projector - InFocus LP280 User Manual

SETTING UP THE PROJECTOR

1 Place the projector on a flat surface.
The projector must be within 6 feet (1.8 m) of your power
•
source and your computer.
If you want to project from behind a translucent screen, set
•
up the projector behind your screen. See "Rear" on page 25
to reverse the image.
If you are installing the projector on the ceiling, refer to the
•
installation guide that comes with the Ceiling Mount Kit for
more information. To turn the image upside down, see
"Ceiling" on page 25. The Ceiling Mount Kit is sold sepa-
rately, see "Optional Accessories" on page 41.
2 Position the projector the desired distance from the screen.
If the image is too big or too small, use the zoom ring to
•
adjust the size or move the projector forward or backward.
Figure 4 shows three projected image sizes. For more infor-
mation about image size, see "Projected Image Size" on
page 48.
3 Make sure the projector and the computer are turned off.
19.7 ft.
9.8 ft.
3.9 ft.
Projected image size at minimum zoom
NOTE: The projector must be at
least 3.6 feet (1 m) from the pro-
jection screen.
F 4
IGURE
7