Connecting A Video Player - InFocus LP280 User Manual

Connecting a Video Player

If your video device (VCR, DVD player, video camera) uses a
round, one-prong composite video connector, use the composite
audio/video (A/V) cable provided. The end with 2 connectors
attaches to the projector, the other end attaches to the video
device.
If your video device uses a round, four-prong S-video con-
•
nector, use an S-video cable. S-video generates a higher
quality image.
1 Plug the A/V cable's round yellow connector into the "video-
out" connector on your video device (Figure 7). This connec-
tor may be labeled "To Monitor."
If you're using an S-video cable, connect the round black
•
connector to the "S-video out" connector on the video
device.
2 Plug the other yellow connector into the "Video" connector on
the projector.
If you're using S-video, plug the other end of the cable into
•
the "S-Video" connector on the projector.
S-Video
Video Computer VGA Monitor VGA
A/V cable
Connecting the projector to a VCR using the A/V cable
Audio in PS2/RS-232 USB
F
IGURE
7
11