Locking Channels; Locking The Video Inputs; Setting The Gametimer Tm; Using The Panel Lock Feature - Toshiba 17HLV85 Service Manual

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
1. Use the Channel Number buttons (0-9 and 100) to display the
television channel you wish to lock.
2. Press MENU, then press or to display the LOCKS menu.
3. Press or to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS
menu appears.
5. Press or to highlight CH
L O C K S
LOCK and press to display the L O C K
C H L O C K
V I D E O L O C K O F F
CH LOCK menu.
G A M E T I M E R O F F
6. Press or to select the follow-
: S E L E C T
ing:
• SET– to set the channel as one
to be locked. Then press
ENTER.
C H L O C K
• CLEAR– to clear all channels
S E T / C L E A R T V C A B L E
from the list of locked channels. L O C K E D C H 0
0
0
R E T U R N
Then press ENTER.
: S E L E C T
E N T E R : S E T
7. Repeat steps 1 through 6 to lock
other channels. When you have finished locking channels, press
EXIT to return to normal viewing.
If you try to tune a locked channel, the TV/DVD will not display it, but
will display the nearest unlocked channel.
To unlock channels:
1. Press MENU, then press or to display the LOCKS menu.
2. Press or to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press or to highlight CH LOCK and press to display the
CH LOCK menu.
5. Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
6. Press EXIT to return to normal viewing.

Locking the video inputs

With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, COLORSTREAM HD, HDMI, PC, GAME) and
channels 3 and 4. You will not be able to select the input sources with
the INPUT button or Channel buttons unless you clear the setting.
To set up the video lock:
1. Press MENU, then press or to display the LOCKS menu.
2. Press or to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press or to highlight VIDEO
LOCK.
5. Press or to select:
L O C K S
• OFF: Unlocks all video input
L O C K
C H L O C K
V I D E O L O C K O F F
sources.
O F F / V I D E O / V I D E O +
G A M E T I M E R O F F
• VIDEO: Locks VIDEO1, VIDEO2,
COLORSTREAM HD, HDMI, PC,
: S E L E C T
GAME.
• VIDEO +: Locks VIDEO1, VIDEO2, COLORSTREAM HD,
HDMI, PC, GAME, channel 3 and channel 4. This option should
be used if you use the antenna terminal to play a video tape.
6. Press EXIT to return to normal viewing.
28

Labeling channels

Channel labels appear above the channel number display each time
you turn on the TV/DVD, select a channel, or press the DISPLAY
button. You can choose any four characters to identify a channel.
To create channel labels:
1. Select a channel you want to label.
2. Press MENU, then press or until
the OPTION menu appears. O P T I O N
O N T I M E R O F F
F A V O R I T E C H
3. Press or to highlight CH LABEL.
C H L A B E L
V I D E O L A B E L
4. Press to display the CH LABEL
menu. SET/CLEAR will be high-
: S E L E C T
lighted.
5. Press or to highlight SET.
6. Press ENTER to highlight LABEL.
C H L A B E L
7. Press or to enter a character in
S E T / C L E A R
the first space. Press the button
L A B E L
R E T U R N
repeatedly until the character you
: S E L E C T
want appears on the screen. Press
E N T E R : S E T
ENTER.
8. Repeat step 7 to enter the rest of the characters.
If you would like a blank space in
the label name, you must choose
an empty space from the list of CH LABEL :CH002
SET
characters; otherwise, a dash will
LABEL
Ð
appear in that space.
RETURN
9. Repeat steps 1-8 for other chan-
:SELECT ENTER :SET
nels. You can assign a label to each
channel.
10. Press EXIT to return to normal viewing.
Note:
The character will change as below.
–
+
SPACE –
To erase channel labels:
1. Select a channel with a label.
2. Press MENU, then press or until the OPTION menu appears.
3. Press or to highlight CH LABEL.
4. Press to display the CH LABEL menu. SET/CLEAR will be
highlighted.
5. Press or to highlight CLEAR.
6. Press ENTER.
7. Repeat steps 1-6 to erase other channel labels.
30
Channel
Numbers
Enter
: A D J U S T
: C H 0 0 2
0 0
0 0
Exit
0 0
Menu
: A D J U S T
Note:
After programming CH LOCK, change
channels before turning off the television.
Channel
Numbers
INPUT
Enter
Exit
Menu
Note:
After programming VIDEO LOCK, change
channels or press the INPUT key before
: A D J U S T
turning off the TV/DVD.
Channel
Numbers
: A D J U S T
Enter
: C H 0 0 2
– – – –
: A D J U S T
Exit
Menu
Ð Ð Ð
To unlock the video inputs:
1. Press MENU, then press or to display the LOCKS menu.
2. Press or to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press or to highlight VIDEO LOCK and press or
highlight OFF.
5. Press EXIT to return to normal viewing.
Setting the GameTimer TM
TM
With the GameTimer feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
video game (30, 60, 90 or 120 minutes).
To set up the GameTimer:
1. Press MENU, then press or to display the LOCKS menu.
2. Press or to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press or to highlight GAME TIMER.
5. Press or to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
6. Press EXIT to return to normal
viewing. After the GameTimer is
programmed, the display will
L O C K S
appear briefly every ten minutes to
L O C K
C H L O C K
remind you that the GameTimer is V I D E O L O C K O F F
G A M E T I M E R O F F
operating. O F F / 3 0 / 6 0 / 9 0 / 1 2 0
When the programmed time is
: S E L E C T
reached, the TV/DVD will change
channels automatically and enter
VIDEO LOCK mode.

Using the panel lock feature

You can lock the top panel buttons to prevent your settings from being
changed accidentally (by children, for example). When the panel lock is
in ON, all control buttons on the TV/DVD top panel (except POWER)
do not operate.
To lock the panel:
1. Press MENU, then press or to display the LOCKS menu.
2. Press or to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press or to highlight PANEL
LOCK and press or to highlight
ON. LOCKS
If a button on the top panel is
PANEL LOCK ON /
NEW PASSWORD
pressed, the message "NOT
AVAILABLE" appears.
:SELECT
To unlock the panel:
Press and hold the VOLUME – button on the TV/DVD top panel for
about 10 seconds until the message "PANEL LOCK:OFF" appears
on-screen.
You also can unlock the panel using the menus:
1. Press MENU, then press or to display the LOCKS menu.
2. Press or to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press or to highlight PANEL LOCK, and then press
highlight OFF.
29

Selecting the video input source

Press INPUT to view a signal from
S O U R C E S E L E C T I O N
0 . A N T
another device connected to your TV/ 1 . V I D E O 1
2 . V I D E O 2
3 . C o l o r S t r e a m H D
4 . H D M I
DVD, such as a VCR or DVD player.
5 . P C
You can select ANT, VIDEO 1, VIDEO
[ 0 - 5 ] : S E L E C T
2, ColorStream HD, HDMI or PC
depending on which input jacks you
used to connect your devices (see
Pressing INPUT on the remote
"Connecting your TV/DVD" on page
control displays the current signal
11).
source (press INPUT again or 0-5
to change)
You also can use the Channel M M M M M / ? ? ? ? ? buttons to select the video input
source. In addition to cycling through your programmed channels
(page 24), the Channel M M M M M / ? ? ? ? ? buttons will also cycle through the
video input sources, in the order illustrated below.
ANT (programmed channel) VIDEO1 VIDEO2
PC HDMI ColorStream HD GAME

Labeling the video input sources

The video label feature allows you to label each input source for your
TV/DVD from the following preset list of labels:
– : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, then press or to
display the OPTION menu.
2. Press or to highlight VIDEO
O P T I O N
O N T I M E R O F F
LABEL. F A V O R I T E C H
C H L A B E L
V I D E O L A B E L
3. Press to display the VIDEO
LABEL menu.
: S E L E C T
4. Press or to highlight the video
source you want to label.
5. Press or to select the desired
label for that input source.
V I D E O L A B E L
1 . V I D E O 1 - / V C R / D V D / D T V
6. Press EXIT to return to normal
2 . V I D E O 2 -
3 . C o l o r S t r e a m H D
-
4 . H D M I -
viewing.
: S E L E C T

Setting the clock

You must set the clock before you can program the ON timer.
To set the clock: (Example: 8:30 AM)
1. Press MENU, then press or to
display the SETUP menu.
2. Press or to highlight CLOCK
S E T U P
L A N G U A G E E N G L I S H
SET.
C L O C K S E T 1 2
3. Press to highlight the hour T V / C A B L E C A B L E
C H P R O G R A M
A D D / E R A S E A D D
position.
4. Press or to set the hour, then
: S E L E C T
press to highlight the minute
position.
5. Press or to set the minutes,
S E T U P
then press EXIT to return to normal
L A N G U A G E E N G L I S H
C L O C K S E T 8 :
viewing. T V / C A B L E C A B L E
C H P R O G R A M
A D D / E R A S E A D D
: S E L E C T
31
to
Notes:
• Interactive video games that involve shooting
a gun type of joy-stick at an on-screen target
may not work on this TV/DVD.
• To deactivate the GameTimer, set the VIDEO
LOCK to OFF (see "Locking the video inputs"
page 28).
Channel
Numbers
Enter
: A D J U S T
Exit
Menu
TV/DVD top panel
VOLUME –
OFF
:ADJUST
or to
Please note the following regarding
the HDMI source selection:
The HDMI IN jack is not intended for
connection to and should not be used
with a PC (personal computer). See
"Connecting an HDMI or a DVI device to
the HDMI input" on page 17 and "Con-
necting a PC" on page 20 for details.
INPUT
/ O F F / S E T
Exit
Menu
: A D J U S T
S AT / C B L
: A D J U S T
Note:
: 0 0 A M
If the power source for the TV/DVD is
interrupted (for example, the power cord is
: A D J U S T
unplugged or a power failure occurs), you will
need to reset the clock.
3 0 A M
: A D J U S T