Table of Contents
Advertisement
MAP Control Center
1
System Overview
1.1
Certifications
The control center is designed to comply with the following certifications and standards:
Region
GERMANY
Europe
1.2
MAP Control Center Description
The MAP control center is an input device for the Modular Alarm Platform 5000 system. Each
control center has a vibrant-color 14 cm (5.7 in.) LCD screen. The durable touch screen
provides access to the various system functions through an interface with intuitive buttons.
Users touch the images directly on the screen to arm, disarm, or select other menu options.
Based on the user's preference, text is shown in German, English, French, or Dutch.
1.2.1
LCD Screen
To operate the MAP control center, apply moderate pressure to the keys and buttons shown
on the screen. To avoid damage to the touch-sensitive foil do not use sharp objects.
1.2.2
MAP Control Center LEDs
Three light-emitting diodes (LEDs) are located on the left edge of the MAP control center
(Figure 1.1, Page 6):
–
–
–
1.3
Control Center Maintenance
If the control center housing is dirty, clean it with a soft dampened cloth. Do not use corrosive
or abrasive cleaners. Make sure that no fluid gets inside of the housing. To remove
fingerprints or dust from the LCD screen, use a soft cloth that you have dampened slightly
with water.
Bosch Security Systems, Inc.
Certification
VdS
CE
EN50131-1/3 grade 3
Green LED: Indicates that the control center is communicating with the control panel.
Yellow LED: The default behavior indicates if there is a trouble condition or any
component is blocked or bypassed in the security system
Red LED: The default behavior indicates that an alarm condition exists in the security
system
User guide
System Overview | en
Class C, VdS G 111040
Conformité Européene
Alarm Systems – Intrusion
Systems
F.01U.168.328 | 03 | 2011.05
5
Advertisement
Table of Contents
